Perchloric Acid %60 for analysis EMSURE
ürün Kodu : 100518.1000Sorunuz!
100518.1000
Perchloric acid 60% GR for analysis
| Ürün bilgisi | |||
|---|---|---|---|
| Grade | ACS | ||
| HS Code | 2811 19 80 | ||
| Kimyasal ve fiziksel veri | |||
|---|---|---|---|
| Solubility | (20 °C) soluble | ||
| Density | 1.53 g/cm3 (15 °C) | ||
| pH value | (H2O, 20 °C) strongly acid | ||
| Boiling point | 160 °C | ||
| Güvenlik bilgisi | |||
|---|---|---|---|
| R Phrase | R 5- 8-35 Heating may cause an explosion.Contact with combustible material may cause fire.Causes severe burns. |
||
| S Phrase | S 23-26-36/37/39-45 Do not breathe vapour.In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protective clothing, gloves and eye/face protection.In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). |
||
| Categories of danger | oxidizing, corrosive | ||
| Hazard Symbol |
|
||
| Storage class | 5.1A Oxidising Agents | ||
| WGK | WGK 1 slightly water endangering | ||
| Disposal | 22 Inorganic peroxides and oxidants as well as bromine and iodine should be rendered harmless by reduction with acidic sodium thiosulfate solution (Cat. No. 106513); container D or E. Slightly soluble oxidants should be collected separately in container E or I. |
||
| Nakliye bilgisi | |||
|---|---|---|---|
| Declaration (railroad and road) ADR, RID | UN 1873 Perchlorsäure, 5.1 (8), I | ||
| Declaration (transport by sea) IMDG-Code | UN 1873 PERCHLORIC ACID, 5.1 (8), I, Segregation Group: 1 (Acids) | ||
| Declaration (transport by air) IATA-DGR | UN 1873 PERCHLORIC ACID, 5.1 (8), I | ||
| Toksikolojik veri | |||
|---|---|---|---|
| LD 50 oral | LD50 rat 1100 mg/kg | ||
| Spesifikasyonlar | |
|---|---|
| Assay (acidimetric) | 60.0 - 62.0 % |
| Colour | ≤ 10 Hazen |
| Chlorate (ClO3) | ≤ 10 ppm |
| Chloride (Cl) | ≤ 3 ppm |
| Free chlorine | ≤ 0.5 ppm |
| Phosphate and Silicate (as SiO2) | ≤ 5 ppm |
| Sulphate (SO4) | ≤ 10 ppm |
| Total nitrogen (N) | ≤ 10 ppm |
| Heavy metals (as Pb) | ≤ 1 ppm |
| Ag (black) | ≤ 0.1 ppm |
| Al (Aluminium) | ≤ 0.05 ppm |
| As (Arsenic) | ≤ 0.05 ppm |
| Ba (Barium) | ≤ 0.02 ppm |
| Be (Beryllium) | ≤ 0.02 ppm |
| Bi (Bismuth) | ≤ 0.1 ppm |
| Ca (Calcium) | ≤ 0.5 ppm |
| Cd (Cadmium) | ≤ 0.05 ppm |
| Co (Cobalt) | ≤ 0.05 ppm |
| Cu (Copper) | ≤ 0.1 ppm |
| Fe (Iron) | ≤ 1.0 ppm |
| Ge (Germanium) | ≤ 0.05 ppm |
| K (Potassium) | ≤ 0.1 ppm |
| Li (Lithium) | ≤ 0.02 ppm |
| Mg (Magnesium) | ≤ 0.5 ppm |
| Mn (Manganese) | ≤ 0.02 ppm |
| Mo (Molybdenum) | ≤ 0.05 ppm |
| Ni (Nickel) | ≤ 0.1 ppm |
| Pb (Lead) | ≤ 0.05 ppm |
| Sr (Strontium) | ≤ 0.02 ppm |
| Ti (Titanium) | ≤ 0.1 ppm |
| Tl (Thallium) | ≤ 0.05 ppm |
| V (Vanadium) | ≤ 0.05 ppm |
| Zn (Zinc) | ≤ 0.1 ppm |
| Zr (Zirconium) | ≤ 0.1 ppm |
| Residue on ignition (as sulphate) | ≤ 30 ppm |
| ACS, ISO-Reag. | |